iHome iP29 - Manual (Page 7)

4
Using iP29
Using the Line-in Jack
1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your audio device and
the other end of the patch cord into the iP29 Line-in Jack.
2. Switch the Power On/Off Switch to “ON” and the power on indicator will light up to show iP29 is on. You need to set
your device to play too.
3. Press the
+
or
–
Button to adjust the volume. You may need to adjust your device’s volume, too.
4. To switch off the unit, slide the Power On/Off Switch to ‘OFF’. Do remember to switch off your device, too.