Insignia CLOCK RADIO WITH WAKE-UP LIGHT AND DOCK FOR IPOD NS-CLWL01 - Manual (Page 11)

11 www.insigniaproducts.com
Connecting an external device
You can connect an external device, such as an MP3 player, and play files
through your clock radio speakers.
To connect an external device:
1 Plug an 3.5 mm audio cable (not included) into the AUX IN jack on the
back of your clock radio and into the audio out jack on the external
device.
2 Turn on your clock radio, then turn on the external device.
3 Press SOURCE one or more times to select AUX.
4 Start playback on the external device, then adjust the volume on your
clock radio and the external device.
5 When you are through using the external device, unplug it.
Using your clock radio
Turning your clock radio on or off
To turn your clock radio on or off:
• Press (power). Your clock radio turns on.
• Press (power) again. Your clock radio turns off (standby mode).
Warning
When your clock radio is in standby mode, power still flows into it. To completely
disconnect the power, unplug the AC adapter.