Insignia NS-A2113 - Manual (Page 10)

10
Insignia NS-A2113 Mini-Shelf System
www.insignia-products.com
Setting up your shelf system
Connecting the power cord
To use AC power:
1 Make sure that your local AC power source matches the voltage
shown on the plate located on the back of the system. If it does
not, consult your dealer or service center.
2 Connect the power cord to the AC connector on the shelf system,
then plug it into the AC wall outlet.
3 To switch the shelf system off completely, unplug the power cord
from the AC wall outlet.
5 DISC 2 button Press to play disc 2 in the CD changer.
6 DISC 3 button Press to play disc 3 in the CD changer.
7 SEARCH / buttons Press to fast reverse or fast forward a disc to
search for a selection.
8 PROG button Press to program CD playback.
9 STOP button Press to stop playback of a disc.
Caution
Unplug the power cord from the AC wall outlet during heavy
thunderstorms to protect your shelf system.
# Description Function