T-v link functions, Nextview link, Tv auto power on – JVC SR-VS30EK User Manual

Page 16: Vcr auto standby, Direct rec

Advertising
background image

Masterpage:Left-FullCol

16

Filename [SR-VS30EK_1a-EN.fm]

Page 16

February 1, 2002 1:49 pm

T-V LINK

T-V Link Functions

When you connect the recorder to your TV via a fully-wired 21-pin SCART cable (

pg. 11), the following functions are available.

You can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.

* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART cable.

The degree of compatibility and available functions may differ by system.

NexTView Link

You can download the EPG (Electronic Programme Guide) information from your TV for timer-programming on the recorder.
For details, refer to the instruction manual of your TV.

TV Auto Power On

The TV will turn on and be set to its AV mode automatically whenever you play a tape.
For details, refer to the instruction manual of your TV.

VCR Auto Standby

You can use your TV’s remote control to turn off the recorder.
For details, refer to the instruction manual of your TV.

Direct Rec

You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to
“ON” (

pg. 67).

SR-VS30EK_1.book Page 16 Friday, February 1, 2002 1:50 PM

Advertising