Jackson 700BI Series - Manual (Page 11)

11
Secure the Condiment
Bins to the Display Panel
using the screws from the
securing plates.
After the Side Shelves have been installed, ensure the Grill Head is pushed back in the pedestal as far as
possible.
With the screws removed from the securing straps, place a screw through the side of the Condiment bins and
secure the Condiment Bins to the Display Panel.
ROTISSERIE KIT INSTALLATION (If Equipped)
1 Install the Motor Mounting Bracket supplied to the Right hand side of the Inner Hood. (If not
already installed)
2 Install the Motor on the Motor Bracket.
3 Place the Rotisserie Rod into the Motor. Slide the Rotisserie Rod Bushing over the opposite end
of the Rod and drop into the cut out provided in the inner Hood Side. Tighten the thumb-screw
provided with the Rotisserie Rod Bushing.
4 Place the forks and Counter Balance on the Rotisserie Rod in the desired location.
5 When in use, spin the rod with your desired food until the weight of the food is at
the bottom. Install the Counter Balance Straight up to effectively balance the
Rotisserie system.
1 Rotisserie Rod Handle
2 Rotisserie Rod Bushing
3 Counter Balance
4 Rotisserie Forks X 2
5 Rotisserie Rod
6 Rotisserie Motor Mount
7 Rotisserie Motor