JobSite Systems A30-X12 - Manual (Page 4)

2
CASCADE
BUS
OUTPUT
MAIN
BUS
INPUT
L
R
L
R
2 1
12
4 3
34
6 5
56
8 7
78
10 9
910
12 11
11 12
Red “Power” LED confirms the amplifier is connected
to a live AC power outlet and that the front panel
master power switch is on. Green “Active” LED lights
when the amplifier circuitry
has been turned on by the
Turn-On circuits.
Front panel “Master Power”
switch turns off the entire
amplifier, including the auto
turn- on circuitry.
Main Bus Inputs enable you
to route a stereo line level
source to the BusMatrix
TM
of the A30-X12.
Cascade outputs of the main
bus input enable you to daisy
chain multiple amplifiers.
3.5 mm Jack for
12v DC Control Output.
“Turn-On” Mode Switch
3.5 mm Jack for
12v DC Control Input.
PRODUCT OVERVIEW
NOTE:This piece of equipment
is not completely disconnected
from the main power source
when the Master Power Switch
is in the OFF position.To com-
pletely disconnect unit from AC
power, remove the removable
AC Power Cord.