GE 45246 GE Wireless Color Camera with AV Receiver - Manual (Page 8)

8
channel (1 or 2) LED will turn on. The receiver
will switch to a different channel each time the
MANUAL button is pressed. The video image for
the channel with an active camera selected will
appear on the monitor. Each camera must be
assigned to a specific channel; both cameras
cannot be on the same channel or the signals will
interfere with each other.
AUTO MODE (two camera operation)
To have the receiver automatically switch between
two active channels, first check the receiver is set to
1/2 position. Next, press the AUTO button on the top
panel of the receiver. The green LED will light and
the receiver will automatically select between the
two active cameras. The monitor will display images
from both cameras alternately.
CAMERA 2
Channel Setting
RECEIVER
Channel Setting
1 2 1/2
1 2
1 2
CAMERA 1
Channel Setting
2
1
2
1