JVC DR-MH300BEK - Manual (Page 103)

Usef
ul F
eature
s
EN I 103
i L-1 OUTPUT
For setting the output signal of the connector in accordance with the connecting device, when using the SCART connector [L-1]
on the rear panel.
SCART VIDEO Outputs video signals.
SCART S-VIDEO Outputs S-Video signals.
SCART RGB Outputs RGB signals.
COMPONENT
Outputs component video signals. (If connecting to the TV via the component
terminal.)
j L-1 INPUT
For setting the input signal of the connector in accordance with the connecting device, when using the SCART connector [L-1]
on the rear panel as a input connector.
VIDEO If connecting video signals.
S-VIDEO If connecting S-Video signals.
k L-2 SELECT
Setting for the SCART connector [L-2] on the rear panel. Mainly for setting the input signals accordingly when connected. Also,
when this unit is turned off, signals of an external tuner can be set to be output from [L-1]. The items that can be set changes
depending on the
AL-1 OUTPUTB setting. [ P34]
VIDEO/RGB If connecting video signals.
S-VIDEO/RGB If connecting S-Video signals.
SAT VIDEO/RGB If connecting video signals with an external tuner.
SAT S-VIDEO/RGB If connecting S-Video signals with an external tuner.
DECODER If connecting a decoder.
FUNCTION SET UP > CONNECTION
l HDMI BDVI COLOUR
For setting the desired images (image quality, colour intensity and black fading), when connecting to the TV’s DVI terminal.
STANDARD Does not adjust the image quality automatically.
ENHANCE Adjusts the image quality automatically.
m HDMI OUTPUT
For setting the image format from this unit’s HDMI output terminal. [ P62]
AUTO Normal setting.
RGB FIX When a normal image is not displayed due to the TV specifications.
INITIAL SET UP > TUNER SET
For setting receiving channels. [ P36]
INITIAL SET UP > CLOCK SET
For setting the clock. [ P35]
FUNCTION SET UP > VIDEO IN/OUT
DR-MH300SE.book Page 103 Thursday, November 24, 2005 9:12 AM