JVC DR-MH300BEK - Manual (Page 21)

Prepar
a
tions
EN I 21
Connect Using HDMI Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT:
0 The default setting for the image output format will be A576iB. If there is no display on the screen, set the output
format. ASwitching the Image Output FormatB [ P62]
0 When both the HDMI cable and SCART cable are connected, be sure to set the following. Setup Menu AL-1
OUTPUTB = ACOMPONENTB [ P103] i
Otherwise, images from the [HDMI OUT] terminal will not be displayed.
0 Leave the external receiver on during timer recording standby.
IN/DECODER
ANTENNA
VIDEO OUT
COAXIAL
PCM/STREAM LEFT
AUDIO
OUT
RIGHT
L-1 L-2 IN/OUT
IN
OUT
Y
P B
P R
COMPONENT
G-LINK
HDMI OUT
DIGITAL OUT
ANT IN
TO TV TO VCR
TO TV
ANT IN
HDMI IN
JVC
L-2
IN/DECODER
G-LINK
ANTENNA
IN
ANTENNA
OUT
HDMI OUT
TO CABLE OR ANTENNA
RF cable
(not supplied)
RF cable
(supplied)
SCART cable
(supplied)
External receiver
IR blaster (G-LINK)
(supplied)
HDMI cable
(not supplied)
TV
DR-MH300SE.book Page 21 Thursday, November 24, 2005 9:12 AM