JVC HR-J245EA - Manual (Page 15)

EN
15
ACCESS INITIAL SET
SCREEN
4
Press PUSH JOG %fi to place the pointer next to
"INITIAL SET", then press OK.
ACCESS G-CODE SETUP
SCREEN
5
Press PUSH JOG %fi to
place the pointer next to
"G-CODE SET-UP", then
press OK.
● The screen to the right
appears.
START SETTING
6
Press OK.
● The GUIDE PROG.
number starts blinking.
INPUT GUIDE PROG.
NUMBER
7
Press NUMBER keys or
PUSH JOG
%fi to input
the Guide Prog. number
( C column in your list),
then press OK.
● The TV PROG number
starts blinking.
INPUT RECEIVING CHAN-
NEL (TV PROG) NUMBER
8
Press NUMBER keys or PUSH JOG %fi to input the TV
Prog. number ( A column in your list), then press OK.
● Repeat steps 6 – 8 as necessary.
RETURN TO NORMAL
SCREEN
9
Press MENU.
4
¶
1
4 ¢
7
3
8
¡
1 2 3
4 5 6
7 / 8
0
9
2
1
3
OK
PUSH JOG
MENU
G-CODE SET-UP
GUIDE PROG TV PROG
1 – –
: GUIDE PROG SET
[ 5/∞] : CHECK
[MENU] : EXIT
G-CODE SET-UP
GUIDE PROG TV PROG
1 – –
[0-9] OR [ 5/∞] : SELECT =
[MENU] : EXIT
G-CODE SET-UP
GUIDE PROG TV PROG
2 – –
[0-9] OR [ 5/∞] : SELECT =
[MENU] : EXIT
Guide Prog. Number Set
(if not readily available)
1– Make a list of the stored station names/channel
positions numbers, referring to step 1 on page 14.
2– Press MENU.
3– Press the NUMBER keys to enter the G
-CODE number
(found in your TV listings of magazine, newspaper, etc.)
for a TV programme scheduled to be broadcast of each
station on the list you have made in item 1.
4– Press OK.
● "ERROR=GUIDE
PROG" will be
displayed on the
screen, then the
following screen will
appear.
5– Press the NUMBER keys or PUSH JOG %fi to enter the
channel position your recorder receives that station on
( A column in your list).
6– Press MENU.
● Repeat items 2 – 6 for all the stored stations.
G-CODE SET-UP
GUIDE PROG TV PROG
2 – –
[0-9] OR [
5/∞] : SELECT =
[MENU] : EXIT Guide Prog. No.
NUMBER