JVC GR-D280 - Manual (Page 26)

MasterPage: Advan_Heading0_Right
26
EN
To cancel Interval Shooting mode
Set “INT.SHOT” to “OFF” in step
1.
NOTES:
● To distinguish between still images taken in
Interval Shooting mode and other still images, it is
recommended that you reset the file names before
shooting. (
੬ pg. 28)
● Interval Shooting will stop if the battery runs out of
power or the Memory Card becomes full.
● The function “Animation” in the provided software
“Digital Photo Navigator” can be used to create
movie files from the captured still images
(Windows
® only). To create movie files with the
Macintosh, it is recommended that you use the
function “Creating a Slideshow From Still Images”
in the commercial software “QuickTime Pro”.
Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
1
Load a memory card. ( ੬ pg. 17)
2
Set the VIDEO/MEMORY Switch to
“MEMORY”.
3
Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
● A stored image is displayed.
4
Press – to display the previous file. Press + to
display the next file.
NOTE:
Images shot and stored on the card with another
device with resolutions other than “640 x 480” and
“1024 x 768” will be displayed as thumbnails only.
These thumbnail images cannot be transferred to a
PC.
Playback Zoom
Available only with the remote control.
(
੬ pg. 24)
Normal Playback Of Images
M A
Power Switch
Lock Button
8
–
+
4/9
MENU
VIDEO/MEMORY
D.S.C. PLAYBACK
GR-D280PAL.book Page 26 Saturday, January 22, 2005 4:09 PM