Jensen SMPV-xGBEB - Manual (Page 20)

19
Note: “Fine” quality will take up larger memory space than “Long”
type for same recording time.
MENU-3-3 Record gain
Tap Button to set the sensitivity of the built-in recording
microphone.
Tap -or+ Button to choose from 0 – 7 where 0 is lowest
sensitivity and 7 is highest. Default setting is 3.
Tap Button to confirm.
MENU-3-4 Exit
Choose this to return to record pause or stop screen.
MENU-4 PLAYBACK
Choose PLAYBACK to playback live or radio recordings stored in
memory.
While playing, the following 4 functions are available:
MENU-4-1 Repeat mode
Tap -or+ Button to choose from 7 playback/repeat modes:
Normal – Repeat one – Folder once – Folder – Repeat all –
Random - Intro
Press Button to confirm.
MENU-4-2 Tempo rate
This function allows you to change the playback speed.
There are 17 levels from -8 to +8 in which -8 is the slowest, +8 is
the fastest and 0 (default) means normal speed.
MENU-4-3 A-B replay
This function allows you to repeat a certain passage of the chosen
file for the chosen number of cycles at the chosen rest interval in
between successive replays.
Tap Button to start replay function. “A” starts to blink in the
screen.
Tap+ Button to fix replay start point “A”, “B” will start to flash for
the end point.