About the back box, Installation instructions – JBL INSTALLATION P941BB User Manual

Page 4

Advertising
background image

4

ABOUT THE
BACK BOX

Thank you for purchasing the JBL
Performance P81BB/P941BB Back
Boxes, which are optional rear enclo-
sures for the JBL P81 and P941 In-Wall
Loudspeakers. The P81BB/P941BB
Back Boxes which provide optimal vol-
ume for woofer alignment and reduce
acoustic bleed-through to rooms
adjacent to your listening area. The
P81BB/P941BB Back Boxes also func-
tion as mounting brackets designed
to facilitate the installation of the
P81/P941 in-wall loudspeakers in new
construction or major retro-fit installa-
tions. The back boxes improve sonic
performance while providing solid sup-
port for the speaker mounting frame
and baffle assembly. Since the back
box is installed before the drywall is
mounted, it allows the speakers to be
mounted in a clean, efficient manner.

The JBL P81BB/P941BB Back Box
measures 17-1/2 inches x 28-5/8 inches
(445mm x 727mm) (including the
flanges). The back box is designed
to mount between two 2x4-inch (or
2x6-inch) wall studs on 16-inch centers.
See Figures 1 and 2 for inner dimen-
sions of the P81BB and P941BB.

The following items are required for
installation:

• tape measure

• carpenter’s level

• pencil

• hammer

• nails

• drywall section

• drywall screws

• staples/U nails

• utility knife

• service wire (included)

• work gloves

• face mask

CAUTION
The back box should be installed by a
professional. Installers must adhere to
local building codes to ensure proper
installation. JBL is not responsible for
any injury or damage caused by
improper installation.

Figure 2: P941BB Back Box Height and Width

19.22 inches

(488.2mm)

12.50 inches

(317.5mm)

28.62 inches

(727mm)

17.50 inches

(444.5mm)

13.57 inches

(344.7mm)

21.16 inches

(537.5mm)

INSTALLATION
INSTRUCTIONS

14.84 inches

(376.9mm)

10.65 inches

(270.5mm)

17.50 inches

(444.5mm)

13.57 inches

(344.7mm)

16.78 inches

(426.2mm)

28.62 inches

(727mm)

Place side flange

on top of stud

This flange fits in between wall studs

In-wall fits here

Figure 1: P81BB Back Box Height and Width

P81BB, P941BB OM 11/16/05 3:04 PM Page 4

Advertising
This manual is related to the following products: