GE 24908 GE Universal Remote - Manual (Page 9)

9
TV off.
Menu Function
The Menu Function is used to make changes in the selected
settings such as setting color, channels, timer, etc. The MENU
button invokes TV, and SAT
modes. Each menu will vary from
brand to brand.
Entering the Menu Mode:
1. Push the device button on
the remote for the desired menu
screen.
2. Push the MENU button. This
allows you to view the menu of the
device chosen. The menu should
now be visible on your television.
3. While in Menu Mode, these
buttons will function as follows:
VOL UP/DOWN buttons will
operate as CURSOR RIGHT/LEFT.
CHAN UP/DOWN buttons will
operate as CURSOR UP/DOWN.
Not all functions in competitive
models and brands of
televisions may be fully supported.
For RCA, GE, ProScan TVs pushing the MENU button will
select the highlighted item. The numeric buttons may also be
used to select the MENU choice.
EXITING THE MENU MODE
To exit the Menu Mode and clear the screen, push the device but-
ton you have chosen on the remote.
NOTE: The remote will automatically exit the Menu Mode after ten
(10) seconds of inactivity with no buttons being pushed.
Special notes:
1. Because of the wide variety of menu formats, some experiment-
ing may be required.
2. SONY: Pressing the ENTER button while in menu mode returns
to previous menu.
3. ZENITH: Push the menu button a second time to move from the
SET-UP MENU to the VIDEO MENU.
BLINK
BLINK
BLINK