JVC SR-DVM70EU - Manual (Page 30)

Filename [DVM70S_06DVD Operation.fm]
Masterpage:Left+
30
EN
BASIC OPERATIONS ON DVD DECK
Page 30Friday, 4 March 2005 15:40
Setting The Progressive Mode
You can obtain optimal picture quality by selecting whether the content on
the disc is processed by field (video source) or by frame (film source).
1
Set the unit to the progressive scan mode. (A pg. 80)
2
Press ON SCREEN twice to access the on-screen bar.
3
Press D E to select A B, then press ENTER. The pop-up
window appears under the selected item.
4
Press F G to select the desired option, then press ENTER.
AUTO :
This mode automatically detects film and video content for
progressive playback. When film content is found, flag
detection is used to invoke playback of film data in full screen.
When video content is found, pictures from multiple fields are
used to detect sections with movement, and then this
movement undergoes advanced image processing for output of
sharp, detailed progressive images without any reduction in
image quality where movement occurs. Normally, operation in
this mode is recommended.
FILM :
Suitable for playing back a progressive scanned film source
disc.
VIDEO :
Suitable for playing back a video source disc. The outlines on
the played back pictures will be soft.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
When the progressive mode is set, be sure to set
AL-1 OUTPUTB to
ACOMPONENTB (A pg. 63). Progressive scan is output only from
[COMPONENT VIDEO OUT] connectors.
Programme Playback
You can programme up to 30 tracks (Video CD/SVCD or Audio
CD) to play back in the desired order.
While stopped
1
Press ON SCREEN twice to access the on-screen bar.
2
Press D E to select APRGMB, then press ENTER. The
programme table appears under on-screen bar.
3
Press the number keys to
enter the track numbers in the
desired order.
Examples:
A To select track 5, press the
number key A5B and ENTER.
B To select track 15, press the
number key A1B and A5B.
C To select track 25, press the number key A2B and A5B.
If you have specified a wrong selection
Press CANCEL(
L). The last selection is erased.
Or press CLEAR ( o). The whole selection is erased.
4
Press I. Playback starts in the programmed order.
● When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
● To add tracks to the end of the programme, perform steps 1
through 3.
● During Programme Playback, pressing T skips to the next
selection of the programme. Pressing S returns to the
beginning of the current selection.
To clear the on-screen bar and the contents of the programme
Press ON SCREEN.
To cancel Programme Playback
Press
D E to select APRGMB, then press ENTER.
NOTE:
Programme Playback is not possible depending on the type of
disc.
Random Playback
You can play back all the tracks on the disc in random order.
While stopped
1
Press ON SCREEN twice to access the on-screen bar.
2
Press D E to select ARNDB, then press ENTER. Playback starts
in random order.
To clear the on-screen bar
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
The same track will not be played back more than once during
Random Playback.
Select The Switching Interval Of The Slide Show
You can control the switching interval of the slide show.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press D E to select A B, then press ENTER. The pop-up
window appears under the selected item.
3
Press F G to select the desired option, then press ENTER.
● Each time you press F G, the interval changes as follows:
5 SEC. Y 10 SEC. Y 15 SEC. Y 20 SEC. Y 25 SEC. Y
30 SEC. Y (Back to the beginning)
To clear the on-screen bar
Press ON SCREEN.
NOTE:
JPEG files are played back as a slide show. It may take more time
to display an image with larger file size.
DVD-
VIDEO
CHAPTER 99 EACH 0:00 TITLE 99
CINEMA AUTO 3D-ON
VCD
TRACK 99 EACH 0:00
CINEMA
USE [0-9] KEYS TO SELECT TRACK
Program Total Time
VCD
TRACK 99 EACH 0:00
CINEMA
JPEG
TRACK 99 GROUP 99
5 SEC.
DVM70S_00.book Page 30 Friday, March 4, 2005 3:40 PM