John Lewis JLWFF1552 - Manual (Page 19)

19
Before any connection, maintenance or cleaning
work is carried out, DISCONNECT the appliance
from the ELECTRICITY supply.
Internal cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
N E V E R U S E D E T E R G E N T S ,
ABRASIVE POWDERS,
HIGHLY
PERFUMED CLEANING PRODUCTS
OR WAX POLISHES, TO CLEAN THE
INTERIOR AS THESE WILL DAMAGE
THE SURFACE AND LEAVE A
STRONG ODOUR.
When the appliance is not in use
When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all
foods and clean the appliance, leaving the doors ajar
to prevent unpleasant smells.
External cleaning
Once or twice a year dust the condenser (black
grill) and the compressor at the back of the
appliance, with a brush or vacuum cleaner, see
figure, as an accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.
Changing the light bulb
Refrigerator
Should the interior light fail to work, first switch off
the appliance and disconnect from the electricity
supply, then replace the bulb as follows;
Maintenance and cleaning
Press on the rear hook and at the same time slide the
cover in the direction indicated by the arrow.
Unscrew the bulb and replace it with one of the same
power (the maximum power is shown on the light
diffuser) available from your nearest Service Force
Centre.
Replace the light cover by sliding it into its original
position.
Wine cooler
Lamp replacement safety
instructions
For safety reasons this appliance is provided with
special lamps specifically tested and certified for the
foreseen use.
They can only be replaced with lamps of the same
type and having the same characteristics.
Replacement lamps must only be requested from
our authorised service centre.
Do not use non-certified normal lamps.
PR259