JVC TH-A75 - Manual (Page 11)

7
Getting started
Connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the component
you are going to connect.
Connecting a TV
To view pictures and on-screen displays, connect a TV to the center unit.
• Distortion of picture may occur when connecting to a TV through a VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” on the PICTURE menu correctly according to the aspect ratio of your TV. See page 53.
7 Selecting the color system
This system is compatible with the PAL and NTSC systems. Set the VIDEO OUT SELECT switch on
the rear panel in standby mode to match the color system of your TV. Also make sure that the color
system of a DVD, VCD, or SVCD disc labeled on the package matches your TV.
• If you use a multi-system TV, by setting “MONITOR TYPE” on the PICTURE menu to an appropriate
“MULTI” option, the system outputs a video signal by the same format recorded on the disc (i.e. if you
play an NTSC disc, the system outputs a signal by the NTSC format) regardless of the VIDEO OUT
SELECT switch setting. See page 53.
7 Connecting a TV
Connect a TV using one of the following.
• You can get a better picture quality in the order—Component video > S-video > Composite video.
VIDEO OUT SELECT
PAL NTSC
• Through the component video jacks
• Connect “Y” to “Y,” “P B ” to “P B ,” and “P R ” to “P R ” correctly.
• If your TV supports the progressive video input, you can
enjoy a high quality picture by making the progressive
scanning mode active. See page 19.
Component
video cord
(not supplied)
To component input
TV
• Through the S-video jacks
Match the ∞
mark on the plug
to the one on the
center unit.
To S-video input
SPEAKERS SURROUND BACK VCR DBS
COAXIAL
AM LOOP
(DBS)
LEFT SPEAKER
VCR IN
AV COMPU
LINK- S-VIDEO
DIGITAL IN
ANTENNA
DBS IN OUT
AUDIO IN
VIDEO
R L R L
4 16
FM 75
AM EXT
VIDEO OUT SELECT COMPONENT VIDEO OUT
PAL NTSC
Y PB PR
VIDEO OUT SELECT COMPONENT VIDEO OUT
PAL NTSC
Y PB PR
VCR DBS
COAXIAL
AM LOOP
(DBS)
VCR IN
S-VIDEO
DIGITAL IN
ANTENNA
DBS IN OUT
AUDIO IN
VIDEO
R L R L
FM 75
AM EXT
S-video
cord (not
supplied)
NOTES:
• If the component video input jacks of your TV are of the BNC type,
use a plug adapter to convert the pin plugs to BNC plugs (not
supplied).
• After connecting your TV, select the video output jack type you
watch the DVD playback (see page 25).
TV
• Through the composite video jacks
Composite
video cord
(supplied)
To composite video input
TV
VCR DBS
COAXIAL
AM LOOP
(DBS)
VCR IN
AV COMPU
INK- S-VIDEO
DIGITAL IN
ANTENNA
DBS IN OUT
AUDIO IN
VIDEO
R L R L
FM 75
AM EXT
VIDEO OUT SELECT COMPONENT VIDEO OUT
PAL NTSC
Y PB PR
Red
Blue
Green
EN01-15.TH-A75[A]_f 02.10.11, 2:52 PM 7