Jensen DVDB01 - Manual (Page 11)

12
DVDB01
CD/DVD/VCD OPERATION
Stopping Play
• Press the stop button (5) on the front panel or remote control to stop disc play. Press the
>|| button (6) to resume normal playback.
• Press the stop button (5) on the front panel or remote control twice to stop the playback
and return to the initial chapter.
Moving Through Chapters/Tracks
• Press the >>| button (4) on the unit or remote control to advance to the next chapter/track.
• Press the |<< button (7) on the unit or remote control to move to the previous chapter/track.
Fast Forward/Fast Backward
Press the >> button (35) on the remote control to fast forward. Keep pressing and releasing the
button to increase the rate from “2X” to “4X”, “8X” and “20X”. Press the >|| button (6) to return to
regular playback. Press and hold to fast-forward to a specific location. Release to begin playback
from that point.
Press the << button (34) on the remote control to fast backward. Keep pressing and releasing the
button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Press the >|| button (6) to return to
regular playback. Press and hold to fast backward to a specific location. Release to begin
playback from that point.
Pausing Playback
Press the >|| button (6) on the unit or the >|| button on the remote control during playback to
temporarily stop playback. To return to normal playback, press the >|| button again.
Repeating Playback
Press the RPT button (20) on the remote control to select the repeat mode as follows:
DVD: CHAPTER > TITLE > REP ALL > OFF
VCD/CD: REP 1 > REP ALL > OFF
•
Select CHAPTER to continuously repeat the current chapter.
• Select TITLE to continuously repeat the current title.
• Select REP 1 to continuously repeat the current track.
• Select REP ALL to continuously repeat all chapters/tracks on the current disc. After playing
the last chapter/track, the unit will stop and display the elapsed time.
NOTE: The REPEAT feature does not support VCD 2.0 (with PBC ON).
PBC (Play Back Control) (VCD Only)
For VCDs with play back functionality, play back control (PBC) provides additional controls for
VCD playback.
Press the MENU button (24) on remote control to toggle the PBC function “On”/”Off”. Once PBC is
on, playback starts from track one of the play list.
NOTE: During VCD playback you can press the LANG button (31) on the remote control
during playback to switch the sound between mono and stereo sound in the following
order: MONO LEFT > MONO RIGHT > STEREO.
Zooming
The Zoom function allows you to increase the picture size. Press the ZOOM button (26) on the
remote control to toggle from 2X to 3X to 4X scale and then to 1/2, 1/3 and 1/4 scale. When the
scale is 1/4X, press ZOOM again to select OFF and cancel the Zoom function.
During Zoom mode, press the arrow (<
, > , /\ , \/ ) buttons (29) to move the picture up, down, left, or
right.
Random Play (CD/VCD Only)
Press the SHUFFLE button (19) on the remote control to select and play tracks in random order.
The display will show “RANDOM”. Press the >|| button to begin the shuffled playback. Press the
SHUFFLE button again to turn shuffle off.
Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote control (36). For single digit entries,
press the corresponding number. For two digit entries, press the 10+ button (27) followed by the
last digit (i.e., for track 16, press 10+ and then 6).
DVD VCD
WMA
TITLE CHAPTER DTS EQ CLASSIC POP ROCK
CD
MP3
TRACK
3 8 1
13
2
10
12
16 11 9 6 7 4 5 14 15