JVC HR-XVC25U - Manual (Page 31)

31
CH 125 8 : 47 AM MON
00 : 00 : 00 SP
STEREO SAP
8 : 30 AM MON
00 : 00 : 00 SP
HI - FI
STEREO
Recording a TV program
Press STOP to stop recording.
“ ” will appear on screen for about 4
seconds.
To stop recording
Press PAUSE to avoid recording unwanted
material. Press again to continue the
recording.
“
” will appear on screen for about 4
seconds.
To stop recording temporarily
NOTES:
The pause function will be released after 5 minutes to prevent damage
to the tape or the VCR. The VCR will change to the STOP mode.
You can select a recording channel in the recording pause mode. •
•
Auto Rewind feature
This VCR will automatically rewind the
tape when the tape has ended (except
during ITR and TIMER REC). It will also
eject the tape.
While the VCR is recording, press TV/VCR to select the TV position.
The “VCR” will go off and recording will continue.
Select the TV channel you want to watch by using the TV channel
selector. If the connected TV is JVC’s, use TV CH +/– after slide TV/
VCR/DVD switch to TV.
Recording one program while watching another
NOTE:
Some CATV hookups do not permit viewing one channel while
recording another. See pages 16,17.
To Display VCR operation Status
Press OSD. The clock, day of the week and more information will be
indicated.
To cancel the display: Press OSD until all indicators disappear.
While watching TV
DAY OF THE WEEK
CHANNEL
TAPE SPEED
REAL TIME COUNTER
CLOCK
STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)
While operating a tape
OPERATING
MODE
TAPE IN
AUTO REPEAT
HI-FI STEREO
OUTPUT SELECTION