Changing the picture tone – JVC CA-DXT7 User Manual

Page 76

Advertising
background image

17

English

Changing the Color System and

Scanning Mode

You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the

COMPONENT jacks, you can enjoy a high quality picture
from the built-in DVD player by selecting progressive
scanning mode.

• You can change the setting only while the disc playback is

stopped.

1

Enter the color system setting mode.

2

Select the color system and scanning mode.

3

Store the setting.

Changing the Picture Tone

While viewing a playback pictures on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.

To select a preset picture tone

1

While playing, display VFP setting screen.

2

Select a preset picture tone.

To adjust the picture tone

1

Select “USER1” or “USER2.”

• Follow steps

1

and

2

above.

2

Select a parameter you want to adjust.

3

Adjust the parameter.

4

Repeat steps

2

to

3

to adjust other parameters.

To erase the VFP screen,

press VFP again.

NTSC / PAL

NTSC or PAL Interlaced scanning.
For a conventional PAL or NTSC TV.

NTSC / PAL
PROG

NTSC or PAL Progressive scanning.
For a progressive NTSC or PAL TV.

Remote
ONLY

INFO

SCAN MODE

VFP

4

sec.

PAL

PAL PROG

NTSC PROG

NTSC

SET

Remote
ONLY

SCAN MODE

VFP

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

0

0

0

0

0

0

On the TV screen

NORMAL

Normally select this.

CINEMA

Suitable for a movie source.

USER1/USER2

You can adjust parameters and can
store the settings (see below).

GAMMA

Adjust if the neutral color is bright
or dark. The brightness of dark and
bright portions is maintained
(–3 to +3).

BRIGHTNESS

Adjust if the picture is bright or dark
as a whole (–8 to +8).

CONTRAST

Adjust if the far and near position is
unnatural (–7 to +7).

SATURATION

Adjust if the picture is whitish or
blackish (–7 to +7).

TINT

Adjust if the human skin color is
unnatural (–7 to +7).

SHARPNESS

Adjust if the picture is indistinct
(–8 to +8).

NORMAL

CINEMA

USER2

USER1

ENTER

ENTER

DX-T7_T9[UGUX]-f.book Page 17 Wednesday, February 16, 2005 1:10 PM

Advertising
This manual is related to the following products: