Jensen IR30 - Manual (Page 5)

To ensure proper functioning of the steering wheel remote control,
you must use two AAA type batteries.
If the controlled device no longer responds to any key press or
otherwise indicates a weak battery, please replace the batteries
as indicated below.
1. Lift the locking cover and remove the remote control from the
steering wheel.
2. Push the battery compartment in the direction of the gap and lift
to open the battery compartment.
3. Remove the old batteries and replace with two new AAA
batteries.
Replacing the Battery
NOTE: Place the enclosed ribbon under and around the
batteries before placing them in the battery compartment.
This will allow for easy removal the next time you need to
replace the batteries.
Step 1
Step 2
Ribbon
PAGE 3