JVC HR-J239EE - Manual (Page 5)

EN
5
On-Screen
Displays
You can choose whether or not to have various operational
indicators appear on screen, by setting this function ON or OFF.
Messages appear in the language you select.
The superimposed indication on the TV screen tells you what the recorder is doing.
1– Operation mode indicators
2– Channel position number/Aux. indicator (AUX)
3– Cassette loaded mark
4– Tape speed SP/LP/EP
5– Colour System indicator (
੬
pg. 22)
6– Clock display
7– Current day/month/year
8– Tape direction
9– Tape position indicator (
੬
pg. 12)
10– Counter display (including Counter Memory indicator)
q6
PR. 12 ] SP
23 : 59 PAL
31. 12. 96
M –9 : 59 : 59
0 + + + +
8
2
6
7
1
Turn on the TV and select the VIDEO channel (or AV mode).
9
INITIAL SETTINGS
3
10
5
4
2 2
q 5 / 8
OPERATE
1 2
4 5
3
6
8
0
7 9
OPERATE
OK
OSD ( )
TV PROG. 5∞
TURN ON THE RECORDER
1
Press OPERATE.
SELECT LANGUAGE
2
Press OSD( ). The
Language screen appears.
Place the pointer next to
the language of your
choice by pressing TV
PROG.
5/∞, then press OK
on the remote control to
enter your selection.
SELECT MODE
3
The pointer should already
be next to “O.S.D.”. If not,
press TV PROG.
5/∞ to
place it there.
ENABLE/DISABLE
ON-SCREEN DISPLAY
4
The default setting is “ON”, so if you want on-screen
displays, leave the setting as is and go to step 5. If you
don’t want the displays to appear, press OK to set
“O.S.D.” to “OFF”.
CLOSE MODE SELECT
SCREEN
5
Press OSD ( ).
ENGLISH
[TV PROG 5∞] =
[OSD] : EXIT
O.S.D. : ON
B.E.S.T. : ON
[TV PROG 5∞] = :ON/OFF
[OSD] :EXIT