JVC CA-DXJ36 - Manual (Page 93)

38
AUDIO menu
Item Contents
DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM
signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with built-in
Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in
DTS/MPEG Audio decoder.
DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM
ONLY.”
DOLBY SURROUND: Select this when connecting a surround decoder.
STEREO: Select this when connecting a stereo receiver, MD player, TV, etc.
D. RANGE COMPRESSION You can enjoy a powerful sound at a low volume level while playing Dolby Digital software.
AUTO: Select to apply the compression only to multi-channel encoded audio (except for 1-channel
and 2-channel sources.)
ON: Select this to always apply the compression.
OTHERS menu
Item Contents
RESUME You can select Resume.
ON: The System resumes playback from the position where playback has been stopped (not applicable
for CD).
OFF: Resume is deactivated.
ON SCREEN GUIDE Activate or deactivate the on-screen guide.
ON: Activate the on-screen guide.
OFF: Deactivate the on-screen guide.
DivX REGISTRATION The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded, the System’s
Registration Code is overwritten for copyright protection.
CHOICE.fm Page 38 Tuesday, November 27, 2007 12:48 PM