JVC XV-M565BK - Manual (Page 23)

Basic operations
20
Basic
operations
English
Français
XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN
LVT0521 -013A
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position
next time you press PLAY.
To memorize the interrupted position
1 Set the RESUME setting on the SYSTEM page of the preference display to ON.
(See page 46 for details about how to set.)
2 At the position you want to interrupt playback, press STOP, or press DVD - TV on the remote
control or on the front panel.
The unit memorizes the interrupted position, while [RESUME] lights in the display window.
If you interrupt playback by pressing STOP in step 2 above and then turn off the power, the memory is not cleared.
To resume playback
7
While the disc you interrupt playback last time is still in the disc tray
Press PLAY.
The unit starts playback from the position where you interrupted playback last time.
¶ To clear the resume position memory
Carry out one of the following:
* Take out the disc from the tray.
* Press a DISC (1 - 3) button.
* Press STOP while stopped.
* Turn on the unit by pressing DVD - TV (on the remote control) or (on the front panel).
NOTES
• If you want to resume playback, do not press a DISC (1 - 3) button to start playback or do not press the (on the front panel)
or DVD - TV (on the remote control) to turn on the unit.
• The resume function does not work with Audio CD discs.
• The resume function does not work if RESUME on the SYSTEM page of the preference display is set to OFF.
• In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier than the
resume point you stored.
• The resume function does not work in the program or random mode.
EN17-20.XV-M565BK[U....]/f 7/13/00, 4:08 PM 20