Brightness, Lighting, Auto white set – JVC AV-P720U User Manual

Page 10: Rear control panel

Advertising
background image

10

Brightness

• This function is used to adjust brightness of the material

shown on the monitor screen.

• Adjustment is made with pressing the brightness adjustment

buttons

ᮢ and ᮡ , and the level of adjustment can be con-

firmed with the values (+10 to -10) indicated at the upper
right corner of the monitor screen. The initial setting is ‘0’.

• This button turns lighting ON/OFF.
• If you press this button while lighting is turned OFF, light

will come on; if you push this button while lighting is turned
ON, light will go out.

Lighting

Note:

• If brightness is lacking while IRIS is set at AUTO with the ON

SCREEN ADJUSTMENT, the AUTO IRIS function may not
start at all or take time before starting to operate.

• If you wish to fix the brightness, change the IRIS mode to

MANUAL on the ON SCREEN ADJUSTMENT. (See page 11)

• This function temporarily maintains the AUTO WHITE BAL-

ANCE adjustment. This will be particularly effective when
filming a single color material.

[How to use AUTO WHITE SET]

1

Press the AUTO WHITE SET button while filling the screen
with colorless subject (e.g., the stage’s white section).

2

The indicator lamp will start blinking and the AUTO WHITE
BALANCE adjustment will begin.

3

As soon as the AUTO WHITE BALANCE adjustment is com-
pleted, the indicator lamp will stop blinking and remain lit.

4

To return to the original setting, press the AUTO WHITE
button. This will cancel the AUTO WHITE SET function and
the indicator lamp will go out.

Note:

• Every time lighting on a subject changes, you must re-

peat the AUTO WHITE SET function.

• In order to adjust WHITE BALANCE manually set the

WHITE BALANCE mode to MANUAL on the ON
SCREEN ADJUSTMENT and then fine tune the bal-
ance using the RED LEVEL and the BLUE LEVEL.

• While the ON SCREEN ADJUSTMENT is shown on the

monitor or the MANUAL setting is indicated, the AUTO
WHITE SET button will not function.

Auto White Set

Note:

• Because a fluorescent lamp is used for lighting, it will

take a few seconds to come on.

ON-SCREEN ADJUSTMENT

MENU/ENTER

LIGHTING

AUTO WHITE

SET

IRIS

Rear Control Panel

ON-SCREEN ADJUSTMENT

MENU/ENTER

LIGHTING

AUTO WHITE

SET

IRIS

Rear Control Panel

ON-SCREEN ADJUSTMENT

MENU/ENTER

LIGHTING

AUTO WHITE

SET

IRIS

ON-SCREEN ADJUSTMENT

MENU/ENTER

LIGHTING

AUTO WHITE

SET

IRIS

ON-SCREEN ADJUSTMENT

MENU/ENTER

LIGHTING

AUTO WHITE

SET

IRIS

ON-SCREEN ADJUSTMENT

MENU/ENTER

LIGHTING

AUTO WHITE

SET

IRIS

Rear Control Panel

1

2

3

4

OFF

ON

Blinking

OFF

Advertising