JVC CA-EXD11 - Manual (Page 102)

14
Playing discs (continued)
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
• For a VCD or SVCD, this operation can be
carried out when the disc is stopped, or during
playback without the PBC function.
• For a DVD AUDIO, CD, MP3/WMA or JPEG, this
operation can also be carried out when the disc is
stopped.
• For a DVD VIDEO, you can select the title before
playing, and you can select chapter while playing.
• This operation may not be carried out for some
discs.
Use number buttons to select the
item you want to play.
• Refer to “How to use the number buttons” on
page 15.
Press 7 during playback.
Press 8 during playback.
To start normal playback again, press DVD/CD 3.
• For JPEG slide-show, pressing DVD/CD 3
starts playback from the next file.
Press 8 during pause.
• Each time you press the button, picture will be
advanced frame-by-frame.
Press 1 or y during playback.
• Each time you press the button, the speed
increases as follows.
DivX file/disc:
X1, X2, X3
Except for DivX file/disc:
X2, X5, X10, X20, X60
• To restore the normal speed, press DVD/CD 3.
NOTE
• For MP3, WMA, DivX discs/files, the search speed
shown on the TV is different from described above.
• While playing moving pictures, no sound comes out
during Fast reverse/Fast forward search.
• For a CD or DVD AUDIO, sound is intermittent
during Fast reverse/Fast forward search.
Select an item on the
disc by using the number
buttons
To stop playback
To pause playback
To advance picture
frame-by-frame
Fast reverse/Fast forward
search
EX-D11[U].book Page 14 Tuesday, May 30, 2006 4:13 PM