JVC HD-Z56RX5 - Manual (Page 18)

PICTURE menu
17
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
„ COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is
not clear or no colour appears, choose the colour system manually.
1 Choose COLOUR SYSTEM. Then press the a or 3
button
The sub-menu of the COLOUR SYSTEM function appears.
2 Press the 5 buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the main-picture.
SUB:
You can change the colour system of the sub-picture.
• Choose MAIN when a sub-picture is not displayed.
3 Press the 6 buttons to choose the appropriate colour
system. Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input signal.
• The AUTO function may not function properly if you have poor
signal quality. If the picture is abnormal in the AUTO function,
choose another colour system manually.
For colour system in your country or region, refer to the
table below:
„ 4:3 AUTO ASPECT
You can choose one of three ZOOM modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal
picture (4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then press the a button
2 Press the 6 buttons to choose a ZOOM mode
Area Country or Region System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
PAL
China, Vietnam, etc. PAL
Hong Kong, etc. PAL
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc. NTSC
Europe
Russia, etc. SECAM
Czech Republic, Poland, etc. PAL
Germany, Holland, Belgium, etc. PAL
UK, etc. PAL
Oceania Australia, New Zealand, etc. PAL
Africa
Republic of South Africa, etc. PAL
Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
>>
MAIN SUB
PAL AUTO
OK
COLOUR SYSTEM
>>
OK
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
HD-Z70&56RX5_Eng.book Page 17 Wednesday, August 24, 2005 10:30 AM