John Lewis JLBIDW 1200 - Manual (Page 11)

Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
The dishwasher must be switched off
Factory setting: audible signals activated
1. Press the On/Off button.The indicator lights of the
programme selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons
2 and 3 for about 2 seconds, the indicator
light of the set programme button starts flashing.After about 2
seconds the indicator lights of all the programme selection
buttons will illuminate; this means that the set washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of function buttons 1, 2, 3 and 4 start flashing.
3. Press function button 3, the indicator lights of function
buttons 1, 2 and 4 turn off while the indicator light of function
button 3 goes on flashing, the digital display indicates the
current setting.
4. To change the current setting, press again function button 3,
the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
11
Audible signals deactivated
Audible signals activated (factory set)