JVC HR-XVC26U - Manual (Page 77)

Masterpage:Right-No-Heading
EN
77
Filename [XVC27U_10Subsidiary.fm]
Page 77 6 January 2004 7:46 pm
Mode Set
(DVD deck)
You can change various mode settings on the Mode Set
screen by following the procedure described below.
● For each mode setting, see pages 78 to 80.
● The procedure shows how to set “RESUME” to “ON”
on the DVD Set Up menu screen as an example.
A
Turn on the unit.
Press POWER (1).
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C
Access the DVD Set Up menu screen.
LANGUAGE] PICTURE] AUDIO ] OTHERS
](Back to the beginning)
D
Select the mode.
Press rt to move the hightlight to “RESUME”, then
press ENTER.
E
Select the mode setting.
Press rt to select “ON”, then press ENTER.
F
Return to the normal screen.
Press SET UP.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
LANGUAGE
MENU LANGUAGE (
੬
pg. 22)
AUDIO LANGUAGE (
੬
pg. 22)
SUBTITLE (
੬
pg. 22)
ON SCREEN LANGUAGE (
੬
pg. 21)
PICTURE
MONITOR TYPE (
੬
pg. 18, 78)
PICTURE SOURCE (
੬
pg. 78)
SCREEN SAVER (
੬
pg. 78)
FILE TYPE (
੬
pg. 78)
AUDIO
DIGITAL AUDIO OUTPUT (
੬
pg. 78)
DOWN MIX (
੬
pg. 79)
D. RANGE COMPRESSION (
੬
pg. 79)
OTHERS
RESUME (
੬
pg. 80)
ON SCREEN GUIDE (
੬
pg. 80)
PARENTAL LOCK (
੬
pg. 58)
A Press SET UP.
B Press w e to select
“ OTHERS”.
● Each time you press the
button, the setup menus
change as follows;
ON
OTHERS
RESUME
ON SCREEN GUIDE ON
USE TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP].
ENTER
SELECT
PARENTAL LOCK
XVC27U_01.book Page 77 Wednesday, January 7, 2004 10:48 AM