JVC XV-LTR1 - Manual (Page 40)

Initial settings
38
In
itia
l s
e
tting
s
DOWN MIX
To playback a DVD VIDEO
disc recorded with surround
multichannel audio
correctly, the DOWN MIX
setting must be properly
made according to your
audio system.
Note that this setting affects the output signal from the
AUDIO (both DIGITAL and ANALOG) output jacks when
playing back a DVD VIDEO disc recorded with surround
multichannel audio.
• Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit’s AUDIO output (normally, the
DIGITAL output) to a surround decoder.
• L 0 /R 0
When you enjoy conventional 2-channel stereo audio
by connecting the unit’s AUDIO output to a stereo
amplifier/receiver or television set, or when you
duplicate audio of a DVD VIDEO disc recorded with
surround audio to your MD, cassette, etc.
COMPRESSION
You can compress the
dynamic range of the sound if
needed. Using this function,
you can listen to sound at low
volumes easily.
• ON
Audio is played back with the dynamic range
compressed.
• OFF
Audio is played back as it was recorded.
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
• 4:3 LB. (Letter Box Conversion)
When you connect a normal
TV to the unit.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
• 4:3 PS. (Pan Scan Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on a DVD
VIDEO disc, a portion of the picture is automatically
cut off from the left and right sides of the image.
Depending on the disc, it may
not be possible to playback in
this mode. In that case, the
picture is played back as in 4:3
LB. mode.
• 16:9 WIDE (Wide Television screen)
When you connect a
wide-screen TV to the
unit.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• MODE 1
The current picture gets
dark.
• MODE 2
The “screen saver” picture
appears and its brightness
changes.
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers. Never use the unit's analog output jacks,
which output incorrect signals that may damage your
speakers.
• If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the
amplifier connected to the analog outputs to minimum.
NOTES
• The Down mix function does not work when the 3D
PHONIC function is activated.
• The DOWN MIX setting does not affect an MPEG or
Dolby Digital bitstream signal from DIGITAL OUT.
To enjoy the DOWN MIX effect from DIGITAL OUT
when playing back a disc recorded with the MPEG
Multichannel or Dolby Digital format, set “DIGITAL
AUDIO OUTPUT” to “PCM ONLY” (see page 37).
• When playing back a disc recorded with DTS, you
cannot get the DOWN MIX effect from both DIGITAL
and ANALOG outputs.
DIGITAL AUDIO OUTPUT STREAM / PCM
Lo / Ro
ON
EXIT
DOWN MIX
COMPRESSION
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
DIGITAL AUDIO OUTPUT STREAM / PCM
Lo / Ro
ON
EXIT
DOWN MIX
COMPRESSION
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
NOTES
• The Compression function works only when playing
back a disc recorded with DOLBY DIGITAL 1CH or 2CH.
The setting is not effective for other discs.
• The Compression function does not work when the 3D
PHONIC function is activated.
DISPLAY page
MONITOR TYPE 4:3 LB
MODE 2
ON
EXIT
SCREEN SAVER
ON SCREEN GUIDE
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
MONITOR TYPE 4:3 LB
MODE 2
ON
EXIT
SCREEN SAVER
ON SCREEN GUIDE
AUDIO DISPLAY SYSTEM LANGUAGE
PRESS KEY
3HQJIP 3DJH  7KXUVGD\ -XO\     30