JVC KD-R900 - Manual (Page 15)

ENGLISH
15 OPERATIONS
1
Select <New Pairing>.
2
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
– Some devices have their own PIN code. Enter
the specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
“Wait Pair” appears on the display.
3
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same PIN
code you have just entered for this unit.
“Wait Pair” appears, then “Pairing OK” or
“Connected [Device Name]” appears on the display
when the connection is established. Now you can
use the device through the unit.
appears when Bluetooth connection is
established.
Continued on the next page
The device remains registered even after you
disconnect the device. Use <Connect Phone> or
<Connect Audio> (or activate <Auto Connect>)
to connect the same device from next time on. (See
pages 35 and 36.)
Deleting a registered device
1
Select <Delete Pairing>.
2
Select a device you want to delete.
“Delete OK?” appears on the display.
3
Delete the selection.
“OK” appears on the display when the device is
deleted.
• To return to the previous menu, press BACK.
Connecting a registered device
1
Select <Connect Phone> or
<Connect Audio>.
[Turn] = [Press]
[Turn] = [Press]
[Turn]
=
[Press]
[Turn] = [Press]
EN10-17_KD-R900[J]f.indd 15 EN10-17_KD-R900[J]f.indd 15 2/3/09 4:29:23 PM 2/3/09 4:29:23 PM