Tape position indicator – JVC HR-J4003UM User Manual
Page 17
17
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
COUNT
0:33:27
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search or Instant
ReView. The position of " " in
relation to "B" (Beginning) or "E"
(End) shows you where you are on
the tape.
NOTE:
SUPERIMPOSE must be set to ON, or the indicator will not
appear (
੬
pg. 14).
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after
rewinding.
* Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
If you want the "next function" to automatically start when the
counter reads "0H 00M 00S" (instead of at the beginning of the
tape), press C. MEMORY so that the counter memory indicator
appears on the front display panel before pressing REW or FF.
B
E
+
+
+
6
5
/
8
q
–
™
+
£
POWER
POWER
PLAY
FF
REW
FF
PLAY
TIMER
REW
C.MEMORY