GE 51147 GE Wireless Remote Transmitter User Manual

User’s manual, Wireless remote transmitter

Advertising
background image

Key Chain Remote

RF

100

TXPS

Whole-Home Control

RF

2000

KINPS

Motion-Sensing Control

RF6

13

TX

Operating Instructions
1. Find the slot labeled HOUSE CODE on the back of the unit.
2. Set the HOUSE CODE to any one of the following settings:

NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting.

The transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.

IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).

If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus

transmitters and receivers to a different setting.

3. Set the CHANNEL by using the knob on front as shown.

NOTE: If you set your Wall Mount Control to CHANNEL 1, the unit can control
any receiver set to CHANNEL 1. If you set your Wall Mount Control to
CHANNEL 2, the unit can control any receiver set to CHANNEL 2 ... and so on.

IMPORTANT! A transmitter will control a receiver ONLY if they have the same

HOUSE CODE and CHANNEL settings.

4. Mounting

NOTE: Mounting the Wall Mount Control on masonry or metal walls may degrade the functional
range.

Tape Mounting
A. Make sure surfaces are free of dust, oil and other substances that could affect adhesion.
B. Attach the double-sided tape to back of the Wall Mount Control housing.
C. Press the tape firmly to the mounting surface.

Screw Mounting
A. Using a slotted screwdriver, remove the faceplate of the Wall Mount Control.
B. Place the detached back plate where desired and mark screw locations.
C. Insert the mounting screws into the back plate holes and screw into place.
D. Replace the Wall Mount Control faceplate.

5. Use the toggle button to activate the Wall Mount Control (ON/OFF operation). Make sure
to press firmly and for a minimum of 1 second for best results. An indicator lights RED when
a signal is sent.

6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the installation by using

the ON and OFF buttons.

If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.

We would be happy to answer ALL of your questions. Visit us on the web at www.GESmartHome.com
to download application notes, manuals and to find out more about the GE SmartHome™ product line!

Specifications

Battery Type ............................................................................................................. Use ONLY A23 (12V) Alkaline

NOTE: The functional range will decrease as the battery wears out so make sure to replace the
battery every 6 months for best results.

*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired

operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

GE is a trademark of the General Electric Company
and is used under license to
Jasco Products Company LLC,
311 N.W. 122nd Street,
Oklahoma City, OK 73114.
www.jascoproducts.com.

90 DAY LIMITED WARRANTY: Jasco Products Company warrants this product to be
free from manufacturing defects for a period of ninety days from the original date of
consumer purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to other
products that may be used with this unit. This warranty is in lieu of all other
warranties express or implied. Some states do not allow limitations on how long an
implied warranty lasts or permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This
warranty gives you specific rights, and you may also have other rights which vary
from state to state. If unit should prove defective within the warranty period, return
prepaid with dated proof of purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK. 73114

Enclosed you will find

• (1) Wall Mount Control

• Double-Sided Tape / Screws

(for mounting)

12

V A

23

Battery (installed)

The GE Smart Remote Plus

advantage

Any transmitter in the GE Smart Remote Plus

product line is capable of controlling every

receiver—the ultimate in home convenience.

Control any number of light fixtures or

appliances from up to 150ft* away by

choosing the transmitter and receiver

combination that best suits your needs.

The following GE Smart Remote Plus receivers (sold separately) can be controlled by THIS transmitter:

The receivers above can also be controlled by the following GE Smart Remote Plus transmitters (sold separately):

IMPORTANT! These devices are NOT compatible with devices from other systems.

You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.

Wireless Remote Transmitter

Indoor Outlet

RF

100

RXPS

Outdoor Outlet

RF

106

RXPS

Socket Adapter

RF

104

RXPS

Wall Switch

RF

102

RXPS

Wall Mount Control

RF

102

TXPS

INCLUDED!

1

2

3

4

5

6

7

8

User’s Manual

Expanding your system

The GE Smart Remote Plus

devices operate on any of 8 user-settable channels. The channels

are easy to set / adjust – with the simple turn of a knob. Set up your GE SmartHome

by

purchasing as many transmitters and receivers as you need. The following table is just one

example of how you can configure your Smart Remote Plus

system:

Area

CH Transmitters

Receivers

Bedroom

1 Bedside - Wall Mount Control

(2) Bedside Lamps - (2) Socket Adapters

Entrance - Wall Mount Control Corner Torchiere - Indoor Outlet Adapter

Overhead Light Fixture - Wall Switch

Entertainment System - Indoor Outlet Adapter

Living Room 2 Coffee Table - Timer/Controller (2) End Table Lamps - (2) Socket Adapters

Entrance - Wall Mount Control Overhead Light Fixture - Wall Switch

Entertainment System - Indoor Outlet Adapter

Christmas Tree - Indoor Outlet Adapter

3

Window Santa - Indoor Outlet Adapter

Lighted Poinsettia - Indoor Outlet Adapter

Basement

4 Entrance - Wall Mount Control (4) Overhead Can Fixtures - (4) Socket Adapters

(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters

Garage

5 Entrance - Wall Mount Control (2) Fluorescent Fixtures - (2) Outdoor Outlet Adapters

Overhead Light Fixture - Wall Switch

Outdoor

6 Foyer- Wall Mount Control

Entry Light - Wall Switch

Car Keys - Key Chain Remote

Coach Lantern - Wall Switch

7

Christmas Lights - Outdoor Outlet Adapter

Yard Santa - Outdoor Outlet Adapter

Kitchen

8 Entrance - Wall Mount Control

Coffee Maker - Indoor Outlet Adapter

1 2

ON

GE SmartSecurity

System

GE Smart Remote Plus

Transmitter

CONTROL

ANY NUMBER OF RECEIVERS IN UP TO 8 AREAS OF YO

UR HOME

Advertising