Jacuzzi Gallery N845-LH - Manual (Page 2)

Gallery™ 5 Oval Whirlpool Bath
Model: N845, N850
Gallery™ 5 Oval Bath
Model: N855
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
Ordering Information
Product Code:
N845 Gallery™ 5 Oval Whirlpool Bath
Left Hand
N850 Gallery™ 5 Oval Whirlpool Bath
Right Hand
N855 Gallery™ 5 Oval Bath
• Left and Right Hand Drain Locations
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable #8730
4 X TheraPro™ Jet Rings #D095
AccuPro™ Jet Rings #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze.
Technical Specifi cations
Dimensions
62” L x 43” W x 19” H
(1575 mm) L x (1092 mm) W x (543 mm) H
Drain/Overfl ow
A: 14-3/4” (375 mm) B: 9-1/2” (241 mm)
Cutout
Template Provided P/N P186000
Total Weight
N845, N850: 746 lb (338 kg) / 40 lb/sq. ft. (197 kg/m 2 )
N855: 701 lb (318 kg) / 38 lb/sq. ft. (185 kg/m 2 )
Operating Gallonage
48 U.S. Gal. (182 Liters)
Product Weight
N845, N850: 96 lb (44 kg)
N855: 51 lb (23 kg)
Skirt Mounting
Not Available
Electrical Specifi cations Models N845, N850 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models N845, N850 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
62"
21-1/2"
2"
43"
12" x 4"
9-1/2"
5"
Motor
12" H x 18" L
Service Access
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
SIDE VIEW
W
H
2''
L
END VIEW
#FR55 07/07
DRAIN/OVERFLOW
A
B
Product Shown: Gallery™ 5 Oval Whirlpool Bath Left Hand Shown Model: N845
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.