Jensen Studehaker SB6052 - Manual (Page 5)

4
LOCATION OF CONTROLS
1) DUST COVER
2) LEFT SPEAKER
3) DIAL SCALE
4) TUNING KNOB
5) FUNCTION SELECTOR (PHONO/TAPE/AM/
FM)
6) FM STEREO INDICATOR
7) RIGHT SPEAKER
8) POWER ON/OFF AND VOLUME CONTROL
9) POWER LED INDICATOR
10) TAPE FORWARD/EJECT BUTTON
11) CASSETTE DOOR
12) 45 RPM ADAPTOR
13) 33/45/78 RPM SPEED SELECTOR
14) TONE ARM CLAMP
15) AUTO STOP SWITCH
16) FM STEREO/MONO SWITCH
17) LINE OUT SOCKET
18) FM ANTENNA
19) AC CORD
CAUTION:
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
• UNPACK ALL PARTS AND REMOVE THE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL INCHES
AROUND THE UNIT FOR VENTILATION.
POWER CONNECTION
1. CONNECT THE POWER CORD (16) TO
A 120V AC ~ 60Hz
OUTLET.
2. TURN ON THE POWER (8) BY ROTATING THE VOLUME CONTROL CLOCKWISE UNTIL A CLICK IS HEARD.
IF THE POWER LED INDICATOR (9) IS ON WITH RED LIGHT, IT MEANS THAT THE POWER SUPPLY IS
NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
LISTENING TO RADIO
1. SET THE FUNCTION SELECTOR (5) TO THE DESIRED RADIO BAND (AM OR FM).
2. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (4).
3. ADJUST THE VOLUME CONTROL (8) TO OBTAIN THE DESIRED SOUND LEVEL.
FM & FM-STEREO RECEPTION
z WHEN THE FM STEREO MONO SWITCH (16) IS SET TO THE “MONO” POSITION, PROGRAMS ARE
RECEIVED IN MONO MODE. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK, IT IS PREFERABLE TO
RECEIVE THE PROGRAM IN MONO.
z SET THE FM STEREO MONO SWITCH (16) TO THE “STEREO” POSITION TO RECEIVE STEREO
PROGRAMS. THE LED “ST” INDICATOR (6) WILL LIGHT UP TO SHOW THAT FM STEREO PROGRAM IS
RECEIVED.
HINTS FOR BEST RECEPTION:-
- AM: THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHTLY