JVC 0207WMKMDCJEM - Manual (Page 6)

4
~
AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
For better FM reception
• Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector (IEC or DIN45325).
Ÿ
Speakers
• When connecting the speaker cords, match the polarity of
the speaker terminals: red color to (+) and black color to (–).
!
To connect the powered subwoofer
The subwoofer connected can reproduce the bass sounds
recorded in front left and right channels, but cannot
reproduce the LFE signals in DVD multi-channel discs.
• Before plugging the unit to the main supply, make sure that
the powered subwoofer is turned off.
Extend it so that you can obtain the best
reception.
FM antenna (supplied)
AM loop antenna
(supplied)
FM outdoor antenna
(not supplied)
• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom
of the speakers.
CAUTION:
From right
speaker
From left
speaker
Red
Black
Press and hold
Release Insert
SUBWOOFER
OUT From the powered
subwoofer
(not supplied)
UX-G68[U].book Page 4 Tuesday, December 5, 2006 4:03 PM