JVC LYT1942-001A - Manual (Page 11)

EN
ES
11
Remote Control
• If the burner responds poorly to the remote control, the battery of the
remote control is weak. Replace it with a new battery. Insert correctly
according to the
e and d directions indicated.
• If problem occurs while using the remote control, remove the battery
and insert it again before operating the remote control.
Basic playback
operations
(P. 25, 28)
Power (On/Off)
To perform basic setup
(P. 34)
To display the playback
navigator (P. 23)
To display the tool menu (P. 25)
To display the playback menu
(P. 29)
To change the output
resolution of the image (P. 33)
To display information on the
screen (P. 39)
To display the playback
navigator (P. 27)
To select/confirm
To return to the previous
screen
Note
o
When using the remote
control for the first time
o
When replacing the battery
Pull out the insulation sheet
Lithium battery
CU-VD50U.book Page 11 Tuesday, June 17, 2008 9:45 AM