Jonsered CS 2152 - Manual (Page 39)

English – 39
TECHNICAL DATA
EC-declaration of conformity
(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws Jonsered
CS 2152, CS 2152W, CS 2152WH, CS 2152C, CS 2152CWH and CS 2153, CS 2153WH, CS 2153CWH from 2002’s serial
numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity
with the requirements of the COUNCIL’S DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN ISO
12100-2:2003, CISPR 12:1997, EN ISO 11681-1:2004.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for EC type examination
in accordance with annex VI, have the numbers: 404/07/1170 – CS 2153, CS 2153 WH, CS 2153 C, CS 2153 CWH, 404/02/898
– CS 2152, CS 2152W, CS 2152WH, 404/02/898 – CS 2152C, CS 2152CW, CS 2152CWH
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with annex
V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The certificates have
the numbers: 01/161/065
⎯ CS 2153, CS 2153WH 01/161/066, ⎯ ⎯ ⎯ ⎯ CS 2153C, CS 2153CWH 01/161/047, – CS 2152, CS 2152W,
CS 2152WH, 01/161/048 – CS 2152C, CS 2152CW, CS 2152CWH.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 18 April 2007
Jörgen Rosengren, Business manager