JVC SP-XSV70 - Manual (Page 14)

10
Connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the component
you are going to connect.
Connecting a TV
To view pictures and on-screen displays, connect a TV to the center unit.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
• You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. See page 58.
7
To connect a TV without the component video input jacks
7 To connect a TV with the component video input jacks
If your TV has the component video input jacks, connect it with the component video cord (not supplied) to view a high
quality picture.
• Connect “Y” to “Y,” “P
B ” to “P B ,” and “P R ” to “P R ” correctly.
• If your TV supports the progressive video input, you can enjoy a high quality picture by making the progressive scan
mode active. See page 26.
VIDEO
S-VIDEO
Y P B P R
VIDEO OUT
COMPONENT ANTENNA
DISP.SET
AUX TO SP-PWV70 IN
AC IN
AV
COMPU
LINK
AM COAXIAL
75
AM
R L
H V
FM
EXT
LOOP
DIGITAL IN
OPTICAL
VIDEO OUT SELECT
PAL NTSC
VIDEO
S-VIDEO
VIDEO OUT SELECT
PAL NTSC
VIDEO
S-VIDEO
Y P B P R
VIDEO OUT
COMPONENT ANTENNA
DISP.SET
AUX TO SP-PWV70 IN
AC IN
AV
COMPU
LINK
AM COAXIAL
75
AM
R L
H V
FM
EXT
LOOP
DIGITAL IN
OPTICAL
VIDEO OUT SELECT
PAL NTSC
Y P B P R
COMPONENT
VIDEO OUT SELECT
PAL NTSC
To composite video input
To S-video input
To component video input
NOTE:
If the component video input jacks of your
TV are of the BNC type, use a plug adapter
to convert the pin plugs to BNC plugs (not
supplied).
Video cord (supplied)
S-video cord (not supplied)
Component video cord
(not supplied)
Red
Blue
Green
If your TV has S-video (Y/C-separation) jack, connect it using an S-video cord.
By using this jack, you can get a better picture quality than using composite video connection.
• Connect S-video cord by matching the
∞ mark on the plug to the one on the system.
Center unit
TV
Center unit
TV
7 Selecting the color system
The center unit is compatible with the PAL and NTSC systems. Set the VIDEO OUT SELECT switch on
the rear panel in standby mode to match the color system of your TV. Make sure that the color system
of a DVD, Video CD, or SVCD disc labeled on the package matches your TV.
• If you use a multi-system TV, by setting “MONITOR TYPE” in the PICTURE menu to an appropriate
“MULTI” option, the system outputs a video signal by the same format recorded on the disc (i.e. if
you play an NTSC disc, the system outputs a signal by the NTSC format) regardless of the VIDEO
OUT SELECT switch setting. See page 58. VIDEO OUT SELECT
PAL NTSC
Set the VIDEO OUT SELECT
switch correctly. (See below.)
Set the VIDEO OUT SELECT
switch correctly. (See below.)
EN1-20TH-V70[A]1 02.4.9, 10:15 AM 10