JVC GV-HT1U - Manual (Page 39)

EN
39
MEMORY
SELECT
PRINT
SET
MENU
2 1, 4 3
When “video” is set in the menu item “input”, you can adjust the brightness and tint before
printing.
Adjusting Image Quality – Adjustments before Printing –
Preparations
•Make the connections (
੬pg. 16).
•Select “video” in the “input” menu
(
੬pg. 24).
Selecting Menu Item
•The tint and the brightness of the image can be
adjusted only before storing it.
1 PRESS THE MENU BUTTON
•This action displays the printer menu on the
LCD panel.
2 PRESS THE SELECT BUTTON
•Press the SELECT button repeatedly until
“adj. image” appears.
3 PRESS THE SET BUTTON
•The item on the second line of the LCD
panel starts to blink.
•Adjusting image tint
· Press the SELECT button until “tint” appears.
· Press the SET button repeatedly to select the
desired tint. To increase saturation, select 0, +1,
+2, +3, +4 or +5. The higher numbers indicate
greater saturation. To decrease saturation, select 0,
-1, -2, -3, -4 or -5. The higher numbers indicate
lower saturation.
•Adjusting image brightness
· Press the SELECT button until “bright.” appears.
· Press the SET button repeatedly to select the
desired brightness.
To increase brightness, select 0, +1, +2, +3, +4 or
+5. The higher numbers indicate greater
brightness. To decrease brightness, select 0, -1, -2,
-3, -4 or -5. The higher numbers indicate lower
brightness.
4 PRESS THE MENU BUTTON TWICE
TO CONFIRM THE ENTRY
MENU
MEMORY
SELECT
a d j . a g e i m
. n i t t 0
Y
T
PRINT
SET
a d j m a g e . i
0
a d j m a g e . i
. n i t t
. n i t t
+ 1
a d j m a g e . i
t h . i r b g + 1
ADJUSTMENTS