JVC RX-8020VBK - Manual (Page 50)

47
Entering the Disc Information
For the CD Player with the disc memory function:
You can use the disc memory function through this receiver.
The disc information (its performer, disc title, and music genre) of
normal audio CDs will be stored into the memory built in the CD
player.
For the disc memory function, refer to the manual supplied with
your CD player.
• The performer, disc title, and music genre information are usually
recorded in a CD Text. However, if a CD Text has no genre
information recorded on the disc itself, you can input its music
genre by yourself.
Note:
You can enter the TITLE INPUT screen for a CD Text and input its
titles. However, you cannot store the titles you have input for a CD
Text.
Example: Entering the following information for Disc 1
Performer: “MICHAEL”
Disc title: “MY FAVORITE”
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press
5 or ∞ to move
to “TITLE INPUT,”
then press SET.
The TITLE INPUT/
PERFORMER screen appears.
3. Press 5 / ∞ / 2 / 3 to move in front of a
character you want, then press SET to enter the
character.
• If the current CD is a CD Text, go to step 5 without entering
the performer.
To use the lower case letters, press 5 / ∞ / 2 / 3 to move
to , then press SET.
To use the upper case letters again, press 5 / ∞ / 2 / 3 to
move to , then press SET.
Search for a disc by its genre:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press
5 or ∞ to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen
appears.
3. Press 5 or ∞ to move
to “GENRE,” then
press SET.
The GENRE SEARCH screen
appears.
4. Press 5 or ∞ to move
to the genre you
want to search for, then
press SET.
To show the unseen genres,
press
5 or ∞ until they
appear.
Disc search starts, then the SEARCH RESULT screen showing
the disc titles appears.
5. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press 5
or ∞ to move to a searched-for disc, then press 2 or 3.
Each time you press 2 or 3, the disc information alternates
between its performer and its disc title.
• Starting a disc play and going to the Disc Information
screen (see page 45): Press 5 or ∞ to move to a
searched-for disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press 5 or ∞ until they
appear.
• Going back to the GENRE SEARCH screen: Press EXIT.
EN43-48.RX-8020V[UJ]_f 02.5.22, 9:55 AM 47