Jet Tools HBS-56S - Manual (Page 6)

6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model HBS-56S Horizontal Band Saw. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number.................................................................................................................................. HBS-56S
Stock Number ..................................................................................................................................... 414457
Round Capacity at 90° (in.)........................................................................................................................... 5
Round Capacity at 45° (in.).....................................................................................................................2-3/4
Rectangle Capacity at 90° (in.) ............................................................................................................... 5 x 6
Rectangle Capacity at 45° (in.) ......................................................................................................... 2-3/4 x 4
Throat Depth (in.) .......................................................................................................................................... 5
Vise Swivels (deg.)............................................................................................................................... 0 to 60
Blade Size (in.)........................................................................................................................................... 1/2
Blade Wheel Diameter (in.) .....................................................................................................................7-1/2
Blade Speeds (SFPM) .......................................................................................................... 80, 120 and 200
Bed Height (in.) .....................................................................................................................................29-3/4
Motor ....................................................................................TEFC, 1/2HP, 1Ph, 115/230V (pre-wired 115V)
Overall Dimensions (L x W x H)(in.)...................................................................................... 41.3 x 18.1 x 22
Net Weight (lbs.) ....................................................................................................................................... 172
Shipping Weight (lbs.) ............................................................................................................................... 176
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.