Jacuzzi BY82000 - Manual (Page 4)

Important: Read complete instructions before beginning installation.
Each unit arrives ready for installation, equipped with base, glass and associated hardware.
Remove the unit from the carton. Retain the shipping carton until satisfactory inspection of the product has been
made.
Immediately upon receipt, inspect the base and other components before installing. Check all carton inserts for
parts and hardware. Should inspection reveal any damage or defect in any component, do not install the unit. Damage
or defect to any component claimed after the unit is installed is excluded from the warranty. Jacuzzi Whirlpool Bath's
responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claims
for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty
information packed with the product.
Jacuzzi Whirlpool Bath © is not responsible for any defect that could have been discovered, repaired, or avoided by
following this inspection.
DIMENSIONS
BASE SPECIFICATIONS
PRODUCT WEIGHT (Base and Enclosure )
950 lb
(431 kg)
TOTAL WEIGHT/FLOOR LOADING
1266.6 lb
(574.5 kg)
63.3 lb/sq. ft. (332.1 kg/m 2 )
SPECIFICATIONS
NOTE: MINIMUM WATER PRESSURE FOR THE SYSTEM IS 45 PSI WITH 3/4" HOT & COLD SUPPLY SERVICE.
48"
27-11/16"
TOP VIEW
72"
1/2" FLEXIBLE
WATER SUPPLY
HOSES UNDER
BASE
(BOTH SIDES)
AIR SUPPLY HOSE
FRONT VIEW
4-1/2"
18-11/16"
1-1/2" TILE FLANGE
6-1/2"
27-1/4"
30-1/4"
21-1/16"
2
Jacuzzi Whirlpool Bath © BY82000 03/05