Jacuzzi Riva 6 Pure Air II Bath EA40 - Manual (Page 2)

Riva
®
6
puRe aiR® ii Bath
technical Specifications
DimenSionS
72” L x 42” W x 20-1/2” H
(1829 mm) L x (1067 mm) W x (521 mm) H
DRain/oveRflow
A: 16” (406 mm) B: 11-1/2” (292 mm)
Cutout
Template Provided Part Number: P186000
total weight
1021.4 lb (464 kg) / 48.9 lb/ft
2 (238 kg/m 2 )
opeRating gallonage
67 U.S. Gal. (254 Liters)
Min. 56 U.S. Gal. (212 Liters)
Max. 77 U.S. Gal. (292 Liters)
pRoDuCt weight
130 lb (59 kg)
SkiRt mounting
Not Available
eleCtRiCal SpeCifiCationS
Requires a dedicated gfCi protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
heateR
No water heater is available on this unit. Blower has integral air heater.
© 2008 Jacuzzi Whirlpool Bath • 14525 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FQ93-000 05/08
ea40 Riva ® 6 Pure Air ® II Bath, Left Hand
• Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
72"
21"
2"
42"
2"
14" x 4"
11-1/2"
Blower
12" H x 18" L
Service Access
6-7/8"
RIVA® 6, LEFT HAND AIR BATH
END VIEW SIDE VIEW
20-1/2"
42" 72"
2"
(51 mm) (Blower)
DRAIN/OVERFLOW
A
B
product Shown: Riva® 6 pure air® ii Bath
left hand Shown model: ea40
* Measurements inside unit represent cutout
in floor to allow for drain/overflow.
Minimum Service Access dimensions given.