Jensen JMC-180 User Manual
Page 11
E-10
5. While playing, press the PLAY/PAUSE
BUTTON to pause, the PLAY/PAUSE INDICATOR “
f” will
flash. Press the PLAY/PAUSE
BUTTON again to resume playing.
6.
Adjust the VOLUME BUTTONS (+/-) to the desired volume level.
REPEAT MODE
REPEAT 1
When the REPEAT BUTTON is pressed once, the REPEAT 1 Indicator, ‘REP 1’, will appear in the LCD
DISPLAY. The current track will be played repeatedly
REPEAT ALL
When the REPEAT BUTTON is pressed twice, the REPEAT INDICATOR, “REP ALL” will
light in the LCD DISPLAY. The whole disc will be played continuously.
To Cancel Repeat Function: Press the REPEAT BUTTON until the repeat indicator is off.
SKIP AND SEARCH MODE
1.
During Play or Pause mode, tap the SKIP FORWARD " " or SKIP BACKWARD " " BUTTON to go to the
next track or go back to the beginning of the current track.
2. During playback, press and hold the SEARCH FORWARD " " or SEARCH BACKWARD " " Buttons to
search within the current track with audible high speed playback.
RANDOM PLAY MODE
This feature allows the track on the disc to be played in a random order.
1.
In CD play or stop mode, press the “
¯²” BUTTON once, a track is selected in random
and random play starts. The RANDOM INDICATOR, “RAND”, will appear on the LCD
DISPLAY.
2.
To cancel the random play function, press the “
¯²” BUTTON again, the RANDOM
INDICATOR, “RAND” disappears from the LCD DISPLAY
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1.
Press the PROG BUTTON once. Both the Program No, “01”, and PROGRAM
INDICATOR, “PROG” will flash in the DISPLAY.
2.
Press the SKIP FORWARD " " or SKIP BACKWARD " " BUTTON to select the
track to be programmed. For example track no. 5 is selected. The PROGRAM
INDICATOR “PROG” will flash to prompt for confirmation.
3.
Press the PROGRAM BUTTON again to store the selection. The Program No. will
advance to “02” and flash together with the PROGRAM INDICATOR, “PROG”, to
prompt for the next input.
4.
Press the SKIP FORWARD " " or SKIP BACKWARD " " BUTTON to select the
track to be programmed. For example the second selection is track no. 8. The
PROGRAM INDICATOR “PROG” will flash to prompt for confirmation.
5.
Press the PROGRAM BUTTON again to store your second selection. You may repeat
steps #2 to #4
to program up to 20 tracks. As soon as you have entered the 20th track, the LCD DISPLAY