JVC EX-D1 - Manual (Page 27)

25
Advanced operations
1
Press ZOOM during playback or
while paused.
• Each time you press the button, the picture
magnification will be changed.
• (For a JPEG) You cannot change the
picture magnification during slide-show
playback.
2
Select the portion you want to
see by using cursor
5/∞/2/3
.
• To resume normal playback, select “ZOOM
OFF” in Step 1 .
1
Press VFP during playback or
while paused.
The current setting will be displayed on the
TV screen.
• GAMMA: Adjust this if the neutral color is
bright or dark. The brightness of dark and
bright portion is maintained.
• BRIGHTNESS: Adjust this if the picture is
bright or dark on the whole.
• CONTRAST: Adjust this if the far and near
position is unnatural.
• SATURATION: Adjust this if the picture is
whitish or blackish.
• TINT: Adjust this if the appearance of flesh
tone is unnatural.
• SHARPNESS: Adjust this if the picture is
indistinct.
2
Press cursor
2/3
to select VFP
mode.
• It is recommended to select “NORMAL”
usually, or “CINEMA” in a dark room. When
either “NORMAL” or “CINEMA” is selected,
go to Step
7 .
• When either “USER 1” or “USER 2” is
selected, the adjustment can be carried out
in detail in the operations after Step
3 .
3
Press cursor
5/∞
to select an
item to be adjusted.
4
Press ENTER.
5
Press cursor
5/∞
to change the
value.
6
Press ENTER.
To adjust other items, go back to Step 3 .
7
Press VFP to go off the window.
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• “VFP” is an abbreviation of “Video Fine Processor”.
Enlarging the picture
(ZOOM)
Adjusting the picture
quality (VFP)
(only for moving image)
GAMMA
TV screen Ex.:
EX-D1[J].book Page 25 Wednesday, March 2, 2005 9:53 PM