Wiring, Connecting to a built-in center channel amplifier – Jensen JCCSPK User Manual
Page 5
REAR R
REAR R
FRONT R
FRONT R
FRONT L
FRONT L
REAR L
REAR L
GREEN(+)
GREEN(+)
GREEN/BLACK(-)
GREEN/BLACK(-)
WHITE(+)
WHITE(+)
WHITE/BLACK(-)
WHITE/BLACK(-)
GREY(+)
GREY(+)
GREY/BLACK(-)
GREY/BLACK(-)
PURPLE(+)
PURPLE(+)
PURPLE/BLACK(-)
PURPLE/BLACK(-)
CENTER
CENTER
BROWN(+)
BROWN(+)
BROWN/BLACK(-)
BROWN/BLACK(-)
J
E
N
S
E
N
H
E
A
D
U
N
IT
E
X
A
M
P
L
E
If your head unit has a built-in center channel amplifier, connect the positive (+)
terminal from the head unit to the positive (+) terminal on the speaker (the striped
wire). Connect the negative (-) terminal from the head unit to the negative (-)
terminal on the speaker.
Wiring
NOTE: To prepare the
wires for connection,
strip approximately
3/8" of the insulation
from each wire,
exposing the bare
conductors. Twist the
end of each wire
before connecting.
Connecting to a Built-in Center Channel Amplifier
PAGE 3
NOTE: Speaker wire
colors are for
illustrative purposes
only. Please refer to
the owner's manual to
determine the wiring
colors for your radio.