Jensen BT-390 - Manual (Page 13)

2. Installation
r Installing the Caller ID Display
The caller ID is designed to sit on the
dashboard or other location. Once it is
attached to the stand remove the
adhesive cover from the sticker pad
(attached) from the base and press
firmly to secure in place.
If you wish to attach the LCD display elsewhere, such as
next to the car radio, detach the base from the stand by
removing the screw as demonstrated.
Turn the stand inwards and apply a sticker pad (provided)
to the back of the stand. Position the stand and press firmly
to secure in place.
9