Recording features, Instant timer recording (itr), O lamp (video) – JVC DR-MH20B User Manual

Page 38: Pg. 38, Pg. 38, 41, Pg. 38) or time

Advertising
background image

Filename [DR-MH30EU_05DVD Operation.fm]

Masterpage:Left+

38

EN

BASIC OPERATIONS ON DVD DECK

Page 38

Thursday, 3 June 2004 10:46

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.

1

Press 7 on the unit to start recording.

2

Press 7 again to engage the ITR mode.

● On the front display panel, “0:30” appears.

3

If you want to record for more than 30 minutes, press 7 to

extend the time. Each press extends recording time by 30 minutes.

NOTES:

● You can only perform ITR using the 7 button on the unit.

● If “DIRECT REC” is set to “ON” in the menu, Instant Timer Recording

(ITR) function does not work. (

੬ pg. 70)

● When the recording capacity becomes full during timer recording or

Instant Timer Recording, the unit automatically performs “Relief
Recording” (

੬ pg. 48).

Watch Another Programme While Recording On The
Unit

While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (

੬ pg. 65)

1

During recording, press TV AV/VIDEO to select TV mode.

● Video mode is disengaged and the video lamp (VIDEO) on the unit is

turned off.

● The programme received on the TV’s tuner is displayed on the TV

screen.

2

Slide the TV/CABLE/SAT/DVD switch to TV.

3

Press PR +/– repeatedly to select the desired channel.

Elapsed Recording Time And Disc Remaining Time
Indication

During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.

● Each time you press DISPLAY, the time indication changes as

follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)

Recording Features

● Turn on the unit.

● Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD.

● Press DVD so that the DVD lamp lights up on the unit.

7

DVD

TV AV/ VIDEO

DISPLAY

DVD

PR+/-

CABLE/DBS

DVD

TV

DR-MH30EU_00.book Page 38 Thursday, June 3, 2004 11:00 AM

Advertising
This manual is related to the following products: