Care and cleaning 1 – John Lewis JLDWS1202 User Manual

Page 24

Advertising
background image

24

Switching Off the Dishwasher

When the dishwasher cycle has ended, the dot-shaped light signal be-
low the door of the appliance goes out.
If the acoustic signal has been enabled, a continuous tone will sound
for 15 seconds at the end of the dishwashing cycle.
If the dishwasher door is not opened, the acoustic signal sounds again
after 3 and 6 minutes.
With some dishwashing cycles, the drying fan continues to run even af-
ter the end of the cycle.

1

Carefully open the door. Hot steam may escape.

Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for
about 15 minutes before removing them. You also get a better drying
result.

1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the water tap.

Removing the Dishes

3

It is normal for the inner door and the dispensers to be damp.

• Empty the lower basket first, then the upper basket. This way you

avoid dripping water from the upper basket onto dishes in the lower
basket.

Care and Cleaning
1

Do not use furniture care products or aggressive cleaners.
• When necessary, clean the dishwasher’s controls with a soft cloth.
• Occasionally check the internal dispensers, door seal and water inlet

filter (if fitted) for dirt and clean them, if necessary.

Advertising